limitless? single switch adapter wls series description honeywells limitless? product line uses the latest commercial off-the-shelf wireless technology and is now expanding the wls series to convert almost any electromechanical switch with low-energy contacts (i.e., gold) into a wireless switch. a user- supplied electromechanical switch is simply wired to the wls series single switch adapter via the internal or external connec - tions to then become a wireless-enabled switch for use with the limitless? wpmm or wdrr series of monitors/receivers. the limitless? single switch adapter can be used in a variety of in - dustrial wireless limit switch applications such as reed, contact, pressure, door actuator, etc. the limitless? series is especially benefcial for remote moni - toring applications where wiring or wire maintenance is not physically possible or economically feasible. combining this greater fexibility with proven harsh-duty packaging can result in increased effciencies and improved safety for machines, equip - ment, oems, and operators. features wireless design ? radio (license-free and global): wpan 802.15.4, 2.4 ghz, point-to-point ? fcc 15, ic, acma, etsi, cofetel, wpc & ida ? up to 305 m [1000 ft] line-of-sight communication range when used with a limitless? wpmm series wireless monitor or wdrr series receiver module (sold separately) ? reliable, fexible, and secure wireless transmission ? standard replaceable battery with ultra-low power con - sumption ? direct or remote mount antenna options mechanical design ? ip67; nema 1, 4, 12, 13 ? 4 pin m12 micro-change receptacle, cable grip with inter - nal connector wiring options ? internal battery power ? body phosphate treated and epoxy fnished with a 30 % glass-flled pbt plastic head benefits ? allows almost any type of electromechanical switch with low-energy contacts (i.e., gold) to become wireless ? enables presence/absence detection in remote parts of ap - plication/machinery, where wiring is an issue or not feasible ? ability to reconfgure multiple switches, which easily allows for adding, subtracting or relocating of the limitless? wls single switch adapters ? reduced installation/maintenance costs with no wires, con - duit, strain relief, clips, connectors, connection boxes, etc. ? eliminates issues with wire connection integrity on moving equipment ? consumes ultra-low power to prolong battery life potential applications ? agricultural equipment ? construction equipment ? door actuation (up/down) switch ? industrial machines ? lifts ? machine tools ? packaging machinery ? wireless warehouse operations ? wireless electromechanical switch applications (i.e., pres - sure switch, reed switch, basic switch and/or limit switch)
2 honeywell ? sensing and control performance specifications characteristic measure series name wls series product type limitless? single switch adapter availability global, license-free bands housing material zinc body is phosphate treated and epoxy flled; 30 % glass-flled pbt plastic head housing type wls radio wpan 802.15.4; 2.4 ghz communication agency approvals/ certifcates* ? fcc 15.247: united sates of america ? ic rss 210: canada ? cofetel: mexico ? etsi, ce mark: european countries ? acma, c-tick: australia ? ida: singapore ? wpc: india antenna type rp-sma jack for direct or remote mount antenna options; omni directional standard signal range nominal 305 m [1000 ft] clear line of sight between limitless? switch and monitor/receiver when using 2.2 dbi integral antennas internal power option (battery) 3.6 vdc lithium thionyl chloride; 2/3 aa size (est. life >1yr) manufactured by uniwell, part number dev-10-0009 or green energy, part number er14335m sealing ip67, nema 1, 4, 12, 13 emc latest applicable standards: en 300 328, v1.7.1; en 61326-1 (2006); en 301 489-1, v1.8.1; en 301 489-17, v2.1.1 shock iec 60068-2-27; half sine, 50 g, 6 ms, 3 axis vibration iec 60068-2-6; 10-500hz w/ 0,35 mm peak-to-peak, 58-500 hz- 10g operating temperature -40 c to 85 c [-40 f to 185 f] electromechanical switch spdt (form c) switch with low-energy contacts (i.e., gold) capable of reliably controlling a 3.6 vdc @ 30 ma electrical load to ensure proper operation electrical connections ? 4-pin m12 micro-connector with three-pole, single keyway female receptacle ? cable grip with internal screw connector note: maximum cable length 3 m [9.84 ft] * honeywell is continuing to add new country communication agency approvals as opportunities and requirements are established. limitless? wls series
honeywell ? sensing and control 3 wls series single-switch adapter product nomenclature wls switch type a countr y use code a b us, canada, mexico all other appr oved countries 1, 2, 3 q q operating head code wls series wir eless see specials 1 gen code a rf code 1 v ersion 1 a 2.4 ghz; ieee 802.15.4 02 03 04 05 00 01 00 no antenna; rp-sma connector jack 2.2 dbi omni w/switch mount; straight design 2.2 dbi omni w/switch mount; tilt/swivel 3.0 dbi omni w/r emote adhesive mount 9.8 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 10ft cable 06 07 9.0 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 9.0 dbi omni w/r emote mag. mount, tilt/swivel 10ft cable bt2 bt1 specials inter nal batter y w/ micr o-connector on side of head antenna t ype code 08 09 8.0 dbi omni w/r emote bkt. mount, str . design 3 ft cable 8.0 dbi omni w/r emote bkt. mount, str . design 11 ft cable 1 use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in countr y code a. 2 some countries r equir e speci?c communication cer ti?cations. contact honeywell for existing cer ti?cation infor mation. 3 if limitless devices ar e used on machiner y that may shipped globally , use countr y code ?b?. 10 2.2 dbi omni w/r emote mag. mount, tilt/swivel 10 ft cable 11 0 dbi omni w/ switch mount; straight design 3 4 5 modi?cation code (bt2 & bt4 only) head assembled with cable grip/connector to right side head assembled with cable grip/connector to left side head assembled with cable grip/connector to mounting sur face head assembled with cable grip/connector to label side bt1 inter nal batter y w/ micr o-connector on top of head bt4 inter nal batter y w/ cable grip on side of head bt3 inter nal batter y w/ cable grip on top of head standard listings part number description wls1a00aqbt1 limitless? wls series single switch adapter, no antenna, internal battery with m12 micro-connector on top of head for use in us, canada, and mexico wls1a00bqbt1 limitless? wls series single switch adapter, no antenna, internal battery with m12 micro-connector on top wls1a02aqbt1 limitless? wls series single switch adapter, 2.2 dbi tilt/swivel antenna, internal battery with m12 micro- connector on top of head for use in us, canada, and mexico wls1a02bqbt1 limitless? wls series single switch adapter, 2.2 dbi tilt/swivel antenna, internal battery with m12 micro- wls1a11aqbt1 limitless? wls series single switch adapter, 0 dbi straight antenna, internal battery with m12 micro-con nector on top of head for use in us, canada, and mexico wls1a11bqbt1 limitless? wls series single switch adapter, 0 dbi straight antenna, internal battery with m12 micro-con wls1a00aqbt3 limitless wls series single switch adapter, no antenna, internal battery with cable grip on top of head for use in us, canada, and mexico wls1a00bqbt3 limitless wls series single switch adapter, no antenna, internal battery with cable grip on top of head for use in all other approved countries wls1a02aqbt3 limitless? wls series single switch adapter, 2.2 dbi tilt/swivel antenna, internal battery with cable grip on top of head for use in us, canada, and mexico wls1a02bqbt3 limitless? wls series single switch adapter, 2.2 dbi tilt/swivel antenna, internal battery with cable grip on wls1a11aqbt3 limitless? wls series single switch adapter, 0 dbi straight antenna, internal battery with cable grip on top of head for use in us, canada, and mexico wls1a11bqbt3 limitless? wls series single switch adapter, 0 dbi straight antenna, internal battery with cable grip on top limitless? single switch adapter
4 honeywell ? sensing and control wls series single-switch adapter dimensions limitless? wls series
honeywell ? sensing and control 5 wdrr switch type a countr y use code a b us, canada mexico all other appr oved countries 1,2,3 wdrr series din-rail receiver 1 gen code a rf code 1 v ersion 1 a 2.4 ghz; ieee 802.15.4 02 03 04 05 00 01 00 no antenna; rp-sma connector jack 2.2 dbi omni w/switch mount; straight design 2.2 dbi omni w/switch mount; tilt/swivel 3.0 dbi omni w/r emote adhesive mount 9.8 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 10 ft cable 06 07 9.0 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 9.0 dbi omni w/r emote mag. mount, tilt/swivel 10 ft cable antenna type code 08 09 8.0 dbi omni w/r emote bkt. mount, str . design 3 ft cable 8.0 dbi omni w/r emote bkt. mount, str . design 11 ft cable 1 use with antenna type codes 00 - 03, 05, 10, 11 only; usage allowed in countr y code a. 2 some countries r equir e speci?c communication cer ti?cations. contact honeywell for existing cer ti?cation infor mation. 3 if limitless? devices ar e used on machiner y that may be shipped globally , use country code ?b?. 10 2.2 dbi omni w/r emote mag. mount, tilt/swivel 10 ft cable 0 output code a channel code 0 npn/pnp selectable a 14 channels wdrr series receiver product nomenclature (used in conjunction with the limitless? wls switch) wpmm series monitor product nomenclature (used in conjunction with the limitless? wls switch) wpmm switch type a countr y use code a b us, canada, mexico all other appr oved countries 1, 2, 3 wpmm series monitor 1 gen code a rf code 1 v ersion 1 a 2.4 ghz; ieee 802.15.4 02 03 04 05 00 01 00 no antenna; rp-sma connector jack 2.2 dbi omni w/switch mount; straight design 2.2 dbi omni w/switch mount; tilt/swivel 3.0 dbi omni w/r emote adhesive mount 9.8 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 5.5 dbi omni w/r emote mag. mount, tilt/swivel 10ft cable 06 07 9.0 dbi omni w/r emote mag. mount, tilt/swivel 5 ft cable 9.0 dbi omni w/r emote mag. mount, tilt/swivel 10ft cable antenna type code 08 09 8.0 dbi omni w/r emote bkt. mount, str . design 3 ft cable 8.0 dbi omni w/r emote bkt. mount, str . design 11 ft cable 1 use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in countr y code a. 2 some countries r equir e speci?c communication cer ti?cations. contact honeywell for existing cer ti?cation infor mation. 3 if limitless devices ar e used on machiner y that may shipped globally , use countr y code ?b?. 10 2.2 dbi omni w/r emote mag. mount, tilt/swivel 10 ft cable limitless? single switch adapter
6 honeywell ? sensing and control antenna options wan01rsp straight design, 2.2 dbi gain, direct mount connector wan02rsp tilt & swivel design, 2.2 dbi gain, direct mount connector wan05rsp & wamm100rsp-005 t/s, 9 dbi gain, magnetic mount wan03rsp fat design, 3 dbi gain, adhesive mount wan06rnj straight design, 8 dbi gain, bracket mount wan07rsp straight design, 0 dbi gain, direct mount connector wan11rsp low-profle dome antenna, 4.0 dbi gain, through-hole screw mount wan09rsp low-profle mobile antenna, 3.0 dbi gain, magnetic mount wan10rsp straight mobile an - tenna, 5.0 dbi gain, magnetic mount wpb1 wpmm mounting bracket wpr1 wpmm panel mount retainer wan04rsp tilt & swivel design, 5.5 dbi gain, direct mount connector antenna type code 01 antenna type code 02 antenna type code 03 antenna type code 11 antenna type code 04 limitless? wls series
honeywell ? sensing and control 7 antenna cable options wca200rnprsp-002 cable assembly: 2 ft 1 wca200rnprsp-010 cable assembly: 10 ft 1 1 use only with wan06rnj antenna and when extra cable is desired wca200rnjrsp-002 cable assembly: 2 feet length 2 wca200rnjrsp-005 cable assembly: 5 feet length 2 wca200rnjrsp-010 cable assembly: 10 feet length 2 wca200rnjrsp-015 cable assembly: 15 feet length 2 wca200rnjrsp-020 cable assembly: 20 feet length 2 2 use when extra cable length is desired and allows connection from rp-sma jack to rp-sma plug mounting options limitless? panel mount accessories wamm100rsp-005 magnetic antenna mount: w/ 5 ft of cable 3 wamm100rsp-010 magnetic antenna mount: w/ 10 ft of cable 3 3 use only with wan01rsp, wan02rsp, wan04rsp, wan05rsp, or wan08rsp antennas limitless? single switch adapter
find out more honeywell serves its customers through a worldwide network of sales offces, representatives and distributors. for application assistance, current specifca - tions, pricing or name of the nearest authorized distributor, contact your local sales offce. to learn more about honeywells sensing and control products, call +1-815-235-6847/ 1-800-537-6945 , visit honeywell.com/limitless, or e-mail inquiries to info.sc@honeywell.com warranty. honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. honeywells standard product warranty applies unless agreed to otherwise by honeywell in writing; please refer to your order acknowledgement or consult your local sales offce for specifc warranty details. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace, at its option, without charge those items it fnds defective. the foregoing is buyers sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and ftness for a particular purpose. in no event shall honeywell be liable for consequential, special, or indirect damages. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. specifcations may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. warning misuse of documentation ? the information presented in this datasheet is for reference only. do not use this document as product installation information. ? complete installation, operation and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury. warning personal injury do not use these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. warning honeywell does not recommend using devices for critical control applications where there is, or may be, a single point of failure or where single points of failure may result in an unsafe condition. it is up to the end-user to weigh the risks and benefts to determine if the products are appropriate for the application based on security, safety and performance. additionally, it is up to the end-user to ensure that the control strategy results in a safe operating condition if any crucial segment of the control solution fails. honeywell customers assume full responsibility for learning and meeting the required declaration of conformity, regulations, guidelines, etc. for each country in their distribution market. 002367-1-en il50 glo december 2012 copyright ? 2012 honeywell international inc. all rights reserved. limitless? wls series limitless? single switch adapter sensing and control honeywell 1985 douglas drive north golden valley, mn 55422 usa honeywell.com
|
